Gotta Love that Global Warming . . .

This time 3 years ago we were spending a week at Glacier National Park in northern Montana.

At that time, it pretty much looked like this.

GNP 3

adfadsfad

And this.

GNP 5

adfadsfad

But, after more than 15” of snow the other day, the above scene looks like this.

Glacier Natonal Park Snow2

Yes, the waterfall is frozen. Really glad we aren’t there this year.

Later in the afternoon, I went outside to change out one of my headlight bulbs on the truck. I remember the good old days when you could just pull the bulb socket out of the back of housing, plug in the new bulb, put the socket back in, and you were good to go.

However, changing this one out now requires a #10 Torx driver and a 10mm socket and a ratchet with a long extension with 4 bolts and  screws.

After finally finishing up the headlight repair, I checked the engine oil and transmission oil, on kind of a ‘while I was in there’ basis.

Around 3pm we headed back over to Mishawaka for a couple of reasons. The first was, Jan already had a Wal-Mart / Sam’s list, and we were just there Friday.

The other reason  was that when we ate at Outback Steakhouse that night, I left my little bottle of ground Ghost Pepper/Trinidad Scorpion powder, and I was hoping they still had it.

So our first stop was at Outback, and they did still have my bottle in their Lost & Found box. Yea!

And our next stop was, believe it or not, Taco Bell. Jan and I had been seeing the ads for their new ‘Quesarito’. It’s a burrito wrapped up inside a cheesy quesadilla.

Quesarito

It looked really good, and tasted even better. Jan got hers with the ground beef, and I got the grilled steak. And they also have shredded chicken. We both got the Quesarito Box, which comes with a Quesarito, a Crunchy ground beef taco, a Doritos Nacho Cheese Crunchy Taco, and a drink.

The  Doritos Nacho Cheese Crunchy Taco has a taco shell made in, what else, Doritos Nacho Cheese flavor. And again, it’s really good. If I’d known how good, I would have paid the little bit extra to get both tacos that way.

And even better was the price. Our total bill was $12.38.

We used to eat at Taco Bell a lot when our kids were little, but kind of got out of the habit. Maybe we need to rethink that.

Our next stop was Sam’s Club. We wanted to get another box of the fresh cherries that we got on Friday. They were really good, and we wanted more. And then after our Wal-Mart stop, we headed home.

Coming back to Elkhart, I stopped off at Menard’s to get some hardware for my latest project.

I needed to take down my AC grills so I could clean the filters, but that involves digging out a screwdriver, and it’s a pain in the rear trying hold the grill up with one hand and get the screws out with the other.

AC Coil Cleaning 1

Plus the fact that continuously putting the screws back in the same holes is making them looser.

So I decided to install hanger bolts in the screw holes and use wing nuts to hold up the grill.

Hanger bolts look like this. It’s wood screw on one end and a machine bolt on the other.

Hanger Bolt

But the first problem you have with these is – how do you screw them in. Well, they make a special driver that looks like this. But it costs more money (about $8) than I spent on the rest of the project (8 hanger bolts and 8 wing nuts – about $6).

Hanger Bolt Driver

So here’s my cheap version. It’s just two nuts with a lock washer in between, and then tightened down snug.

Hanger Bolt Driver -DIY

Then my ratchet will screw them in just fine. And cheaper too.

So when I got finished, and after cleaning the foam filter, it looked like this.

Wing Nut Installation

Much easier to take down and reinstall.

Tomorrow Nick and Terry should be back from Michigan. Really looking forward to it.

_______________________________________________________________

Thought for the Day:

"Computers in the future may weigh no more than 1.5 tons"
Popular Mechanics, forecasting the relentless march of science, 1949

“There is no need for any individual to have a computer in their home.”
Ken Olson, President of Digital Equipment Corp, in 1977

adfadsfad